--> ap/xxxxx

__

KiCad drilling (2007.09.19:2 scrying_tech_notes#29 pcb#11)

file misaligned:

1] Plot settings - Gerber, plot origine: absolute, spot min: 0.015, Lines Width: 0.0010, all other settings though greyed out must be as defaults

2] Drill export settings - suppress leading zeroes, 2:4, drill origine: absolute, via drill 0.025, drill sheet: none

3] Check alignment using gerbv: http://gerbv.sourceforge.net/

free Gerber view package (KiCad's gerbview does not yet support examination of .drl drill files)

4] Check also by way of:

https://www.freedfm.com/!freedfmstep1.asp